LoRa Temperature and humidity Sensor

Transmitter provides indoor temperature, humidity, dew-point, enthalpy and wet-bulb temperature measurements with switchable signal outputs RS485 Modbus RTU & LoRa wireless transmission.

Below devices are designed as the temperature and relative humidity(RH) sensors in the private LoRa network. Equipped with switchable RS485 and LoRa interface makes the transmitter flexible for the installation and application. Using the Modbus RTU protocol makes the wireless temperature and humidity transmitter easy to combine with the BMS system, ventilation control system, PLC or the agricultural automation system. Furthermore, the LoRa wireless transmission makes the installation more flexible, in the meantime, save the installation cost.The devices listed below are designed for wireless temperature and humidity monitoring. Please feel free to contact us. It would be our pleasure to answer your questions about our products, services, and turnkey projects.

LoRa IAQ Sensor and Monitor

Measure concentration of multiple gases at one time with switchable RS485 Modbus RTU & LoRa wireless transmission.

Below devices are designed for multiple air quality monitoring and ventilation control. The multi-gas transmitter and monitor are able to measure four indoor air quality indexes simultaneously, includes CO2, temperature, RH and PM2.5, and control the ventilation system to efficiently adjust the indoor air quality. The wireless communication of the monitor and the transmitter make the installation easier, in the meantime, save the installation cost.The devices listed below are designed for wireless multi-gas monitoring. Please feel free to contact us. It would be our pleasure to answer your questions about our products, services, and turnkey projects.

LoRa Oxygen / CO / CO2 Sensor

Detect Oxygen, CO and CO2. Provide switchable signal outputs RS485 Modbus RTU & LoRa wireless transmission.

Adopting microprocessor technology and advanced NDIR sensing elements, Aecl wireless CO2 transmitter is able to precisely measure the CO2 concentration. Equipped with LoRa wireless communication, the CO2 transmitter perfectly solved the installation problem in the traditional building where the pipe and cable are fixed and complex, in this way, save much installation cost.The devices listed below are designed for wireless carbon dioxide monitoring. Please feel free to contact us. It would be our pleasure to answer your questions about our products, services, and turnkey projects.

LoRa particulate matter Sensor

Measure the concentration of PM2.5 & PM10 with switchable signal outputs RS485 Modbus RTU & LoRa wireless transmission.

Below transmitters are designed for wireless PM2.5 and PM10 measurements. Using the advanced laser scattering technology, the transmitters are able to accurately detect the particle size ranges from 1μm to 10μm. The LoRa communication of the particulate matter sensors makes the installation easier. Besides, the data format of the PM2.5 and PM10 transmitter is Modbus RTU which makes it widely used in the building management system, ventilation system as well as the HVAC system.The device listed below are designed for wireless particulate matter monitoring. Please feel free to contact us. It would be our pleasure to answer your questions about our products, services, and turnkey projects.

LoRa HCHO / TVOC Sensor

Detect the concentration of TVOC and formaldehyde (HCHO) with switchable signal outputs RS485 Modbus RTU & LoRa wireless transmission.

The wireless HCHO and TVOC transmitters are used as the wireless sensor node in the private LoRa network. Using the MEMS metal oxide and Electro-chemical sensing elements, the LoRa HCHO and TVOC transmitter could accurately measure the HCHO and TVOC concentration and wirelessly send to the master gateway. The stable wireless communication makes the installation easier, in the meantime, save the installation cost. The Modbus RTU protocol makes the HCHO and TVOC transmitters suitable for BMS system, energy saving system and the ventilation system.The device listed below are designed for wireless HCHO or TVOC monitoring. Please feel free to contact us. It would be our pleasure to answer your questions about our products, services, and turnkey projects.

LoRa NH3 / CH4 / H2S Sensor

Detect the concentration of toxic gas, such as Ammonia (NH3), Methane (CH4) and Hydrogen Sulfide (H2S). Provide switchable signal outputs RS485 Modbus RTU and LoRa wireless transmission.

LoRa Illuminance Sensor

Measure indoor illuminance with switchable signal outputs RS485 Modbus RTU & LoRa wireless transmission.

Below transmitter is designed for environmental illuminance measurement. The light transmitter is widely used in building and agricultural automation to monitor the illuminance variation. With switchable LoRa and Modbus RTU interface, the illuminance transmitter could be easily combined with the industrial automation system. The wireless communication of the lux transmitter makes the installation easier.The device listed below are designed for wireless illuminance monitoring. Please feel free to contact us. It would be our pleasure to answer your questions about our products, services, and turnkey projects.

LoRa Gateway and Converter

Convert signal from RS485 Modbus RTU to LoRa wireless transmission and connect multiple LoRa transmissions via LoRa Gateway.

Aecl designed the master gateway as the receiver in the private LoRa network. The LoRa master gateway is able to collects maximum 32units field devices, meanwhile, interface to the PLC or computer in data protocol Modbus RTU.The device listed below are designed as the gateway for private LoRa network. Please feel free to contact us. It would be our pleasure to answer your questions about our products, services, and turnkey projects.